Fiber Optical Distribution Box

Horizontal Closure provide space and protection for fiber optic cable splicing and joint. They can be mounted aerial, buried, or for underground applications. They are designed to be waterproof and dust proof. They can be used in temperature ranging from -40°C to 85°C, can accommodate 70 to 106 kpa pressure and the case are usually made of high tensile construction plastic.

Description

GPON Interface: 1 *GPON interface (SC/UPC)
Transmission Rate: 2.488Gbps downstream and 1.244bps upstream
LAN: 1GE+3FE with RJ-45 connector
WIFI :2.4G wirless external antenna
VOIP: 1
USB: 1

Datasheet

 

Material 100% NEW PC(Polycarbonate)  Fiber Optic Splitter Splice Closure
Size 380*245*130mm  Fiber Optic Splitter Splice Closure
Cable Ports 1pc un-cut cable port, 2pcs output cable ports, 16pcs drop cable ports
Max Capacity 16FO  Fiber Optic Splitter Splice Closure
Splice Tray 2 pcs  100%PC Material   Fiber Optic Splitter Splice Closure
Weight 4.5~5KG   Fiber Optic Splitter Splice Closure
Accessories Protecting Sleeves, labelling paper, insulation tape, abrasive paper, wall-mount kits, sealing tape, nylon tie, earthing wire, plastic wrench
Sealing Way Silicon Rubbersealing Ring  Fiber Optic Splitter Splice Closure
Installation Way Aerial, wall or pole-Mounting  Fiber Optic Splitter Splice Closure

Test Result

 

Characteristics Value/Performance Methods and Conditions
Mechanical
Air Tightness No air bubble seen Put closure under water for 15min with closure’s internal air pressure set at 100kPa±5kPa.
Remains100kPa±5kPa Measure the internal pressure 24 hours later
Air Tightness after re-installation No air bubble seen and pressure remains unchanged Do re-entry and re-installation 3 times and repeat above Air Tightness Tests.
Axial Pulling Pressure remains unchanged Pulling force: 1000N
Time: 1min
Internal air pressure: 60kPa±5kPa
Compression Pressure remains unchanged Applied pressure: 2000N/100mm
Time: 1min
Internal air pressure: 60kPa±5kPa
Impact Pressure remains unchanged Impact energy: 16N.m
No. of impacts: 3
Internal air pressure: 60±5kPa
Bending Pressure remains unchanged Bending angle±45°(in two opposite directions)
Tension: 150N
No. of bending: 10
Internal air pressure: 60kPa±5kPa
Twisting Pressure remains unchanged Twisting angle: ±90°
Torque: 50N
No. of twisting: 10
Internal air pressure: 60kPa±5kPa
Thermal
Temperature Cycling Pressure drop ≤5kPa Cycling range: -40 ~ +60°C
Cycling time: 2hrs at -40°C, then 2hrs at +60°C
No. of cycling: 3
Internal air pressure: 60kPa±5kPa
Electrical
Insulation Resistance between
metal parts:2.0x105MΩ
Soak closure into water in 1.5m-depth for 24hrs, and measure the insulation resistance after taking it out of water.
Resistance between each metal part and ground:2.0x105MΩ
High Voltage No voltage break-downs and sparks  Fiber Optic Splitter Splice Closure Soak closure into water in 1.5m-depth for 24hrs, then apply 15kV DC to the metal parts inside